Compact Filter GVA (H12 – H13)

Each filter's side covers are made from rigid polyurethane forming, in combination with zinc coated profiles to provide the maximum space for the filter media pack

  • Compact HEPA Filter Type GVA

    The Compact HEPA-Filter GVA is designed and tested to extract the smallest particles out of the air. Each GVA Compact HEPA-Filter contains ten ‘Minipleat-Papercakes’ pleated in one piece and assembled in V-shape technology to achieve the lowest pressure drop results.


  • Design:

    The side covers are made from rigid polyurethane forming in combination with zinc coated profiles on the top and the bottom. This design provides the maximum space for the filter media pack and obtains an extremely high mechanical strength. The fibreglass media pleated in ‘Minipleat shape’ forms one continuous media and is cast in V-shape technology directly into the frame-sealant material. This design gives an absolutely tight media-frame connection in correlation to a highly active filter surface with a minimal pressure drop. The filters are supplied with a flat flange for a secure seal between the filter and each standard holding frame.


  • Testing:

    Each HEPA-filter is tested and packed in accordance with American Standard IEST-RP-CC-001.3 (HEPA and ULPA Filters) or in accordance with the European Standard EN 1822-1, 4&5 (Testing filter elements HEPA and ULPA efficiency and scan method) or other customer requested testing.


  • Features:

    • Efficiencies of 99.97 % up to 99.99 %
    • High quality glass fibre paper
    • Lowest initial pressure drop
    • High quality standard due to Quality Assurance System
    • Highly economic through high final pressure drop
    • Any airflow direction possible making installing easy
    • Rigid frame
    • High quality glass fibre paper
    • Zinc coated profiles
    • Filter height only 292mm
    • High quality standard due to Quality Assurance System
    • High burst pressure (> 2000 Pa)
    • Highly economical through high final pressure drop
    • Useable in two flow directions
    • Filter tested according to BS EN 1822


  • Standards:

    • ASHRAE 52.1
    • ISO 9001:2000
    • EN 779

Compact Filter G7

Compact Filter G7

Finedust filters contain a fibreglass media pack in five different heights and are available in different types and heights of frames
Compact Filter GW

Compact Filter GW

Each filter contains eight, ten, or twelve ‘Minipleat-Media Packs’ pleated in one piece and assembled in V-shape technology to achieve the lowest pressure drop results
Compact Filter GV8 (H10-H14)

Compact Filter GV8 (H10-H14)

The filter's side covers are made from rigid plastic with integrated water outlet slopes on both the up and down stream sides
Compact Filter GVA (H12 – H13)

Compact Filter GVA (H12 – H13)

Each filter's side covers are made from rigid polyurethane forming, in combination with zinc coated profiles to provide the maximum space for the filter media pack