Compact Filter GV8 (F6 – F9)

Finedust Prefilter Designed for Highest Necessities in Gas Turbine Applications

  • Compact Finedust Filter Type GV8 Full Plastic (F6-F9)

    The GV8 Full Plastic compact prefilter is designed for highest necessities in Gas Turbine applications. Each GV8 Full Plastic Filter contains eight (8) ‘Minipleats-Media Packs’ cast in V-shape technology to achieve the lowest pressure drop results, the highest dust holding capacity, and maximum burst pressures.


  • Features:

    • Efficiencies of 60% up to 98% (ASHRAE 52.1)
    • High quality micro fibreglass media
    • Lowest initial pressure drop
    • Highest dust holding capacity
    • High burst pressure (>3000Pa / 2000/Pa)
    • Rigid full plastic frame
    • Filter height only 292mm
    • High quality standard due to Quality Assurance System
    • Highly economical through high final pressure drop
    • Usable in two flow directions
    • Endless Gasket (optional)
    • Filter tested according to EN 779 (based on ASHRAE 52.1)
  • Design:

    The side covers of the filter are made from rigid plastic with integrated water outlet slopes on both the up and down stream sides. Connection slots for the insertion of the pre-filter frame HFA-# are also included. These features, in combination with the reinforced profiles, provide maximum space for the filter media pack and obtain a high mechanical strength. The fibreglass media pleated in ‘mini-pleat shape’ can be reinforced with an additional plastic rib that is cast with polyurethane sealant in V-shape technology directly into the side cover. This design provides a very high burst pressure in correlation with maximum dust holding capacity, low pressure drop, and safe removal of condensate water. The filters are supplied with a flat flange and endless gasket creating a secure seal between the filter and each standard pre-filter holding frame.

  • Standards:

    • EN 779
    • ASHRAE 52.1
    • ISO 9001:2000

  • Optional Testing:

    The filters are tested in accordance with the European standard EN 779 (Particulate air filters for general ventilation). This standard is based on ASHRAE 52.1¹ ¹Gravimetric and Dust-Spot Procedures for Testing Air Cleaning Devices Used in General Ventilation Removing Particulate Matter 1992

Compact Filter G7

Compact Filter G7

Finedust filters contain a fibreglass media pack in five different heights and are available in different types and heights of frames
Compact Filter GW

Compact Filter GW

Each filter contains eight, ten, or twelve ‘Minipleat-Media Packs’ pleated in one piece and assembled in V-shape technology to achieve the lowest pressure drop results
Compact Filter GV8 (H10-H14)

Compact Filter GV8 (H10-H14)

The filter's side covers are made from rigid plastic with integrated water outlet slopes on both the up and down stream sides
Compact Filter GVA (H12 – H13)

Compact Filter GVA (H12 – H13)

Each filter's side covers are made from rigid polyurethane forming, in combination with zinc coated profiles to provide the maximum space for the filter media pack