Home
Company
Products
Resources
Contact
HEPA / ULPA Filters
Carbon Filters
Filter Frames & Housings
Bi-Polar Air Ionizer
Portable Isolation Chambers
Portable Air Filtration Systems
Portable Clean Rooms
NBC/CBRN-Filters
Compact Filter - (GV8, F6-F9)
Compact Filter - (GV8, H10-H14))
Compact HEPA Filter - (GVA, H12-H13)
Compact Filter - (GW)
Panel Filter - (GP)
Terminal Filter - (GT)
Terminal Filter - (HT)
Compact Filter - (G7)
Conical Filter - (GRV)
Cylindrical - (GR0)
Special Filters - (GSX)
Iso Ark
IsoArk N 36
IsoArk N 36-1
Articles
HEPA
HEPA Filters
Home
Company
Products
HEPA / ULPA Filters
Compact Filter - (GV8, F6-F9)
Compact Filter - (GV8, H10-H14))
Compact HEPA Filter - (GVA, H12-H13)
Compact Filter - (GW)
Panel Filter - (GP)
Terminal Filter - (GT)
Terminal Filter - (HT)
Compact Filter - (G7)
Conical Filter - (GRV)
Cylindrical - (GR0)
Special Filters - (GSX)
Carbon Filters
Filter Frames & Housings
Bi-Polar Air Ionizer
Portable Isolation Chambers
Portable Air Filtration Systems
Portable Clean Rooms
NBC/CBRN-Filters
Resources
Contact
GRV Conical Finedust Filters
The GRV conical filter cartridges are designed especially for the high demands in gas turbine air filtration systems. The special filtration media provides maximum protection for the turbine. Through the outstanding durability and the high efficiency of the filter media, the risk of dust entering through media failure or through high penetration values is decreased.
Design
The filter has two zinc coated steel end caps on both sides. The upper one with a glued plastic ring to hold the following filter in position and the lower one with a glued cylindrical gasket for tide connection to housing. The reinforced pleated filter media FA8267 is potted together with the expanded zinc coated steel screens into the caps with polyurethane. The embossed pleating spacers on top of each pleat and the hot melt fixation on the inside ensures the uniform shape of the filter media through the filter lifetime. This construction gives a highly active filter surface with a high dust holding capacity and a low pressure drop.
Testing
Each filter is tested on size and also visually tested for tightness and complementation. In our laboratory we check the tensile strength of unpleated and pleated media using the dumb-bell shape of each roll.
Furthermore, the design of those cartridges is approved through many kinds of examinations such as the dust holding/pressure drop test and also the rust and extreme condition tests.
Features:
For use with GRV as filter pair
High quality paper made of cellulose & synthetic components
Filter is pulse cleanable
Long lifetime through media with high tensile strength
Lowest initial pressure drop
Zinc coated end caps with glued sealing
Expanded zinc coated screen with high open surface
High quality standard due to Quality Assurance System according to Iso 9001:2000
Highly economical through high final pressure drop
For use in gas turbine air filtration with back pulse
Applicable Standards:
High quality standard due Quality Assurance System
ISO 9001:200
Technical Data (pdf)
Pdf contains:
- Technical Data
- Pressure Drop
- Efficiencies
- Filter Sizes
- Dimensional Scetches
- Order Numbers
Copyright ©2008 FILT AIR Ltd.
Best viewed using Microsoft Internet Explorer 7.0